Treehouses Remote

about

description

In order to use treehouses remote, it is required to download a custom Raspbian image that can be found [here](https://treehouses.io/#!pages/download.md) and flash it onto an SD card to be inserted into your Raspberry Pi. With treehouses remote, you can: * Get detailed software and hardware information of a Raspberry Pi * Configure a Raspberry Pi through user-friendly interface * Easily install and access services such as Nextcloud, Netdata, Transmission, MongoDB, MariaDB and Moodle on your RPi * And utilize many more features! Usage: treehouses [command] treehouses help [command] Example Commands: help --- gives you a more detailed info about the command or will output this expandfs --- expands the partition of the RPi image to the maximum of the SD card rename --- changes hostname password --- changes the password for 'pi' user sshkey --- used for adding or removing ssh keys for authentication version --- returns the version of cli.sh command image --- returns version of the system image installed detectrpi --- detects the hardware version of a Raspberry Pi detect --- detects the hardware version of any device ethernet --- configures rpi network interface to a static IP address discover --- performs network scan and discovers all Raspberry Pis on the network wifi --- connects to a wifi network wifihidden --- connects to a hidden wifi network staticwifi --- configures RPi wifi interface to a static ip address wifistatus --- displays signal strength in dBm and layman nomenclature bridge --- configures the RPi to bridge the WLAN interface over a hotspot container docker balena --- enables (and start) the desired container bluetooth --- switches bluetooth from regular to hotspot mode and shows id or MAC address ap --- creates a mobile ap, which has two modes: local (no eth0 bridging), internet (eth0 bridging) apchannel --- sets or prints the current ap channel timezone --- sets the timezone of the system locale --- sets the system locale ssh --- enables or disables the SSH service vnc --- enables or disables the VNC server service default --- sets a raspbian back to default configuration wificountry --- sets the wifi country upgrade --- upgrades cli.sh package using npm sshtunnel --- helps adding an sshtunnel led --- sets the led mode rtc --- sets up the rtc clock specified ntp --- sets rpi to host timing locally or to get timing from a remote server networkmode --- outputs the current network mode button --- gives the gpio pin 18 an action feedback --- sends feedback clone --- clones the current SDCard onto a secondary SD card or specified device restore --- restores a treehouses image to an SD card or specified device burn --- download and burns the latest treehouses image to the SD card or specified device rebootneeded --- shows if reboot is required to apply changes reboots --- reboots at given frequency | removes it if reboot task active internet --- checks if the RPi has access to internet services --- executes the given command on the specified service tor --- deals with services on tor hidden network bootoption --- sets the boot mode openvpn --- helps setting up an openvpn client coralenv --- plays with the coral environmental board memory --- displays the total memory of the device, the memory used as well as the available free memory temperature --- displays Raspberry Pi's CPU temperature speedtest --- tests internet download and upload speed camera --- enables camera, disables camera, captures png photo cron --- adds, deletes a custom cron job or deletes, lists all cron jobs usb --- turns usb ports on or off

publisher

78ce6faa72264387284e647ba6938995735ec8c7d5c5a65737e55130f026307d

first seen

2026-10-08T21:30:45.301948+00:00

last event

2026-03-05 04:46 UTC

install

zapstore.dev or any Zapstore-compatible client

source & build

repository

https://github.com/treehouses/remote

arch flags

android-arm64-v8a android-armeabi-v7a android-x86 android-x86_64

manifest

missing

releases (kind 30063)

1 release indexed; latest 6330.

assets & verification

Every app, release and asset event is schnorr-verified (NIP-01 id + signature) before it enters the catalog, and assets are content-addressed by sha256. We subscribe read-only to the catalog relay — never write to it.

6330 — remote.apk

sha256

044ad02a7e0716d7bd3da0f80dd4a25c93723474aeb3daa06c8449b64ac07079

size

9.3 MB

archs

android-arm64-v8a, android-armeabi-v7a, android-x86, android-x86_64

version code

6330

apk cert sha256

c5b340b166e5212b1e7dbe00b9ac69690a252941e5498e383089d8a00afd6f30

download

remote.apk

Showing the newest 1 asset descriptor; the full set is in /api/apps/78ce6faa…